Skip to content

Home
Glossary
Chapter 1: Number skills
- Overview
- 1.1 Place value and ordering numbers
- 1.2 The four operations
- 1.3 Negative numbers
- 1.4 Priority of operations and inverse operations
- 1.5 Rounding and estimation
- Review
Chapter 2: Factors, multiples and primes
- Overview
- 2.1 Factors, multiples and prime numbers
- 2.2 Prime factorisation, HCF and LCM
- 2.3 Systematic listing strategies
- 2.4 The product rule for counting
- Review
Chapter 3: Powers, roots and indices
- Overview
- 3.1 Powers and roots
- 3.2 Estimating powers and roots
- 3.3 Laws of indices
- 3.4 Negative and fractional indices
- Review
Chapter 4: Fractions, decimals and percentages
- Overview
- 4.1 Equivalent fractions and ordering
- 4.2 Adding and subtracting fractions
- 4.3 Multiplying and dividing fractions
- 4.4 Fractions and terminating decimals
- 4.5 Recurring decimals
- 4.6 Fractions and percentages as operators
- Review
Chapter 5: Ratio and proportion
- Overview
- 5.1 Ratio notation, simplifying and sharing
- 5.2 Ratio, fractions and linear functions
- 5.3 Direct proportion
- 5.4 Inverse proportion
- 5.5 Scale factors, scale diagrams and maps
- 5.6 Comparing lengths, areas and volumes
- Review
Chapter 6: Percentages and financial mathematics
- Overview
- 6.1 Percentage of an amount
- 6.2 Percentage change
- 6.3 Reverse percentages
- 6.4 Simple and compound interest
- 6.5 Growth, decay and repeated percentage change
- Review
Chapter 7: Measures, accuracy, standard form and surds
- Overview
- 7.1 Units of measure and conversions
- 7.2 Compound measures: speed, density and pressure
- 7.3 Rounding and error intervals
- 7.4 Upper and lower bounds
- 7.5 Standard form
- 7.6 Surds and exact calculations
- Review
Chapter 8: Algebraic expressions and manipulation
- Overview
- 8.1 Algebraic notation and vocabulary
- 8.2 Simplifying and collecting like terms
- 8.3 Expanding brackets
- 8.4 Factorising with common factors
- 8.5 Substitution into expressions and formulae
- 8.6 Rearranging formulae
- 8.7 Expanding products of three binomials
- Review
Chapter 9: Equations and inequalities
- Overview
- 9.1 Solving linear equations
- 9.2 Equations with unknowns on both sides
- 9.3 Forming and solving equations
- 9.4 Inequalities on a number line and set notation
- 9.5 Solving linear inequalities
- 9.6 Quadratic inequalities
- Review
Chapter 10: Sequences
- Overview
- 10.1 Term-to-term and position-to-term rules
- 10.2 Special sequences
- 10.3 The nth term of a linear sequence
- 10.4 The nth term of a quadratic sequence
- 10.5 Geometric sequences
- Review
Chapter 11: Straight-line graphs and rates of change
- Overview
- 11.1 Coordinates and plotting graphs
- 11.2 Gradient and intercept: y = mx + c
- 11.3 Finding the equation of a line
- 11.4 Parallel and perpendicular lines
- 11.5 Real-life and distance-time graphs
- 11.6 Gradients and areas under graphs
- Review
Chapter 12: Quadratic expressions, equations and graphs
- Overview
- 12.1 Expanding and factorising quadratics
- 12.2 Factorising harder quadratics
- 12.3 Quadratic graphs and their features
- 12.4 Solving quadratic equations by factorising
- 12.5 The quadratic formula
- 12.6 Completing the square
- Review
Chapter 13: Other functions and graphs
- Overview
- 13.1 Cubic, reciprocal and exponential graphs
- 13.2 Trigonometric graphs
- 13.3 Transformations of graphs
- 13.4 The equation of a circle and tangents
- Review
Chapter 14: Simultaneous equations and iteration
- Overview
- 14.1 Simultaneous equations by elimination
- 14.2 Simultaneous equations by substitution
- 14.3 Solving simultaneous equations graphically
- 14.4 Linear and quadratic simultaneous equations
- 14.5 Iteration and numerical methods
- Review
Chapter 15: Functions, algebraic fractions and proof
- Overview
- 15.1 Functions: inverse and composite
- 15.2 Simplifying algebraic fractions
- 15.3 Operations with algebraic fractions
- 15.4 Identities and equivalent expressions
- 15.5 Algebraic proof
- Review
Chapter 16: Angles, polygons and geometrical reasoning
- Overview
- 16.1 Angle facts at a point and on a line
- 16.2 Angles in parallel lines
- 16.3 Angles in triangles and quadrilaterals
- 16.4 Angles in polygons
- 16.5 Geometrical reasoning and proof
- Review
Chapter 17: Properties, constructions, loci and bearings
- Overview
- 17.1 Properties of 2D and 3D shapes
- 17.2 Plans and elevations
- 17.3 Constructions with ruler and compasses
- 17.4 Loci
- 17.5 Bearings and scale drawings
- Review
Chapter 18: Transformations, congruence and similarity
- Overview
- 18.1 Reflection, rotation and translation
- 18.2 Enlargement
- 18.3 Enlargement with fractional and negative scale factors
- 18.4 Congruence and congruence criteria
- 18.5 Similarity and similar lengths
- 18.6 Similarity: areas and volumes
- Review
Chapter 19: Perimeter, area, surface area and volume
- Overview
- 19.1 Perimeter and area of 2D shapes
- 19.2 Circumference and area of circles
- 19.3 Arc length and sector area
- 19.4 Surface area and volume of prisms and cylinders
- 19.5 Surface area and volume of spheres, cones and pyramids
- 19.6 Composite shapes and solids
- Review
Chapter 20: Pythagoras' theorem and trigonometry
- Overview
- 20.1 Pythagoras' theorem
- 20.2 Trigonometric ratios (SOHCAHTOA)
- 20.3 Angles of elevation and depression
- 20.4 Exact trigonometric values
- 20.5 3D Pythagoras and trigonometry
- 20.6 The sine rule
- 20.7 The cosine rule
- 20.8 The area of any triangle
- Review
Chapter 21: Circle geometry and circle theorems
- Overview
- 21.1 Parts of a circle
- 21.2 Circle theorems
- 21.3 Tangents and chords
- 21.4 Proof of circle theorems
- Review
Chapter 22: Vectors
- Overview
- 22.1 Vector notation and column vectors
- 22.2 Adding and subtracting vectors
- 22.3 Vectors in geometric problems and proofs
- Review
Chapter 23: Probability
- Overview
- 23.1 The probability scale and equally likely outcomes
- 23.2 Relative frequency and expected outcomes
- 23.3 Frequency trees, tables and possibility spaces
- 23.4 Combined events and tree diagrams
- 23.5 Venn diagrams and set notation
- 23.6 Conditional probability
- Review
Chapter 24: Statistics: representing and analysing data
- Overview
- 24.1 Collecting data, sampling and questionnaires
- 24.2 Tables, bar charts, pie charts and pictograms
- 24.3 Averages and range
- 24.4 Averages from frequency tables
- 24.5 Time series and line graphs
- Review
Chapter 25: Statistics: spread, grouped data and correlation
- Overview
- 25.1 Quartiles, interquartile range and box plots
- 25.2 Cumulative frequency
- 25.3 Histograms
- 25.4 Scatter graphs and correlation
- 25.5 Comparing distributions and outliers
- Review
About this book

21.1 Parts of a circle — Practise

Work independently. Questions become more demanding as you progress. Check your answers after you have attempted the set.

A circle has radius $5.2$ cm. Work out its diameter.
A circle has diameter $18$ mm. Work out its radius.
A circle has radius $7$ cm. Is a chord of length $13$ cm possible? Give a reason.
A circle has radius $4$ cm. Work out its diameter, then name the circle boundary.
A circle has diameter $14$ cm. Work out its radius, then name the region between a chord and its arc.
A line through the centre joins two points on the circumference. If the radius is $3$ cm, work out the line length and explain why it is also a chord.
The radius is $3.75$ cm. Work out the diameter.
A straight line touches a circle at exactly one point. Name the line and state how many points of contact it has.
A line joins two points on a circle and passes through its centre. If the radius is $5$ cm, work out the line length and give both correct names.
A chord is $16$ cm long and is the diameter. Find the radius.

Answers and concise solutions

1. Diameter from radius

Answer: $10.4$ cm

2. Radius from diameter

Answer: $9$ mm

3. Check a chord length

Answer: Yes. The diameter is $14$ cm, so a $13$ cm chord is shorter than the longest possible chord.

4. Circle vocabulary

Answer: The diameter is $8$ cm. The boundary is the circumference.

5. Name the segment

Answer: The radius is $7$ cm. The region is a segment.

6. Diameter and chord

Answer: The line is a diameter of length $6$ cm. It is also a chord because it joins two points on the circumference.

7. Decimal radius

Answer: $7.5$ cm

8. Name the tangent

Answer: It is a tangent, with one point of contact.

9. Name the line

Answer: The line is $10$ cm long. It is both a chord and a diameter.

10. Radius of a diameter

Answer: $8$ cm